Rebound valved matched set of aluminum 1/8 scale RC car shock pistons.
16mm, 6 hole, Rebound Valve, drilled 1.1, 1.2, 1.3, and 1.4mm with rubber O-ring.
16 pistons, 16 o-rings, 8 - 25% rebound valves, 8 - 10% rebound valves, and 8 - 0% rebound valves include in package. FREE plastic case included!
(Only install 1 plastic rebound valve per piston on the top side) We recommend installing the same 4 percentage rebound valves (25% or 10% or 0%) on top of all four shocks pistons to keep a consistent balanced rebound.
These piston have been manufactured to the highest tolerances for the serious racers.
Pistons greatly effects the compression and rebound shock stroke. In a shock it is better to have stiffer compression and faster rebound to keep the tire in contact with the ground. That is why we are offering directional valve pistons. One of the things that sets these valve pistons apart from the competition is the ability for you to select the rebound vs compression ratio. This is done simply by installing the desired rebound washer valve. We include 3 types of rebound washers, the thinnest for 25% faster rebound, medium thickness for 10% faster rebound and thick for 0% rebound. The 0% washer valve makes the piston work as a standard traditional 6 hole piston. So whatever your track conditions are, we have you covered!!! Rebound valve pistons works best on high speed loose bumpy European style tracks and for dirt oval racing. We recommend installing 0% rebound valves for technical smooth hard pack clay tracks, or tracks with a lot of jumps. These pistons have great versatility for the advanced racer.
Verified compatible with..
Serpent Cobra SRX8